|
TK4 Series Temp controller Features
- Super high-speed sampling cycle 50 ms
- +0.3% display-accuracy.
- It supports 13 types of thermocouple inputs, RTD (6 Types),it also support 4 types of Analogue voltage input (0 to 100 mV,0 to 5 mV,1 to 5 mV,0 to 10 mV) and 2 types of current input
- It also support 2 type of current input (0 to 20) milli empire,4 to 20 milli empire
- Improved visibility with wide display part and high luminance LED
- High performance controlling with heating/cooling control and automatic/manual control modes
- Communication function supported : RS485 (Modbus RTU type)
- PC parameter setting via USB cable and RS485 communication (Modbus RTU)
- It supports DAQMaster - PC loader program.
- SSR output/Current output selectable
- SSRP output (standard/phase/cycle/control selectable)
- Heater burn-out alarm (C.T input) (except TK4SP)
- Multi SV setting function (Max. 4) selectable via digital input terminals
- Mounting space saving with compact design
- Multi input / Multi range.
- It is available in various sizes (48x 48), (72 x72), (48x96) and (96x96)
Single Display PID Temperature (TC4)
- Single Display Temperature controlling with upgraded PID algorithm
- Input: Thermo couples (J,K) and RTD (Pt-100)
- Output: Relay and SSR Drive output embodied together (Parameter selecting type)
- Optional Event outputs: 2 relay alarm
- Higher visibility with wide display part
- Available Various Standard Sizes
- 100ms high speed sampling and 0.5% high accuracy control
- Power supply: 100-240VAC 50/60Hz
Dual PID Auto Tuning Temperature Controller (TZN / TZ)
- Multi input (13 kinds of input): Thermo couples, RTD, Analog voltage / current
- Available Various DIN Standard Sizes (48x48, 48x96, 96x48, 72x72, 96x96mm)
- Main output : Relay, SSR Drive output, current(4~20mA) options
- Sub output (Event outputs): Loop break Alarm, Sensor break Alarm, 7 kinds of alarm output and 4 types of Alarm selection option
- 2-type of PID control function (PID-Fast, PID-Slow)
- 2-step auto tuning control
- Additional outputs: PV-transmission (4~20mA) and RS485 serial common Port
- Display accuracy: F.S + 0.3%
- Power supply: 100-240VAC 50/60Hz or 24VAC / 24-48VDC options
Cooling / Defrost Temperature Controller (TC3YF)
- Simple ON / OFF controller
- Input: NTC (Thermistor) or RTD (Pt100)
- Indication range: -40.0~99.9oC (NTC), -99.9~99.9oC (RTD)
- Auto / Manual Defrost selection, Start-up delay of compressor, Re-operation delay and Operation delay of evaporation - fan
- Input correction function
- Available to set operation period for protecting compressor in error
- Control output: Relay
- Power supply: 100-240VAC
Automatic Switching Function of 5-Point Input Type (T4WM)
- 5-channel Indicator type
- High accuracy measurement: FS + 0.5%
- 5-point temperature measurement
- Automatic or Manual Channel display selection
- Input: TC (J, K), RTD (Pt100)
- DIN W96 x H48mm
- Power supply: 110/240VAC 50/60Hz
- Screw type terminals
Thumb-Wheel Type Temperature Controller (T3S / T4M / T3H / T4L)
- Available Various Standard DIN Sizes
- ON/OFF and Proportional Control type
- Input: Thermo couples (J,K,R) and RTD (Pt-100)
- Main output: Relay, SSR, current(4~20mA) options
- Display accuracy: F.S + 0.5%
- Power supply: 100-240VAC for T3S, 110/220VAC for T3H / T4M / T4L
Alarm, Sub Output Type Temperature (T3HS / T3HA / T4MA / T4LA)
- Available in Various DIN Standard (48x96, 72x72, 96x96mm) Sizes
- ON/OFF and Proportional Control type
- Thumb wheel type (Digital switch) set-keys
- Input: Thermo couples (J,K,R) and RTD (Pt-100)
- Main output: Relay, SSR, current(4~20mA) options
- Alarm / SUB output: Relay
- Display accuracy: F.S + 0.5%
- Power supply: 110/220VAC 50/60Hz
Dual Setting Temperature Controller (T4LP)
- Control heater and cooler at once
- ON/OFF and Proportional Control type selectable
- Two thumb-wheel switches for two set-values
- Input: Thermo couples (J, K, R) and RTD (Pt-100)
- Main output: Relay, SSR, current(4~20mA) options
- Alarm output: Relay (This can used as Cooler control in Dual setting)
- Display accuracy: F.S + 0.5%
- Power supply: 110/220VAC 50/60Hz
Temperature Indicator (T3NI / T4YI / T4WI / T3SI / T3HI / T4MI / T4LI)
- Available in Various DIN Standard (48x24, 72x36, 48x48, 48x96, 72x72, 96x96mm) Sizes
- High accurate measuring function: Display accuracy: F.S + 0.3% or + 0.5%
- Input: Thermo couples (J, K, R) and RTD (Pt-100)
- Power supply: 100~240VAC or 110/220VAC or 12-24VDC
Analog Temperature Controller (TOS / TOM / TOL)
- Dial type setting no indicator
- Input: Thermo couples (J, K) and RTD (Pt-100)
- LED ON, ON/OFF or Deviation indicator
- Control output: Relay or SSR
- Setting accuracy: F.S + 0.2%
- Power supply: 100-240VAC or 110/220VAC
Board Type Dual PID Controller (TB42)
- Convenient organization of Display and Control board for flexible use
- Input: Thermo couples (J, K) and RTD (Pt-100)
- Control method: ON/OFF, P,PI,PD, PID-F, PID-S
- Control output: Relay, SSR, Current (4~20mA), Sub outputs Event1, 2 and PV-transmission outputs available.
- Setting method: by front panel push-buttons
- <>Power supply: 100-240VAC 50/60Hz.
|
